A Short Guide for Walk-on Glass Floors




In both the home and the workplace, the Walk-on glass floor provides a stunning picture. This is frequently seen in the rooflight. We’re all familiar with the traditional skylight. We may now use them to reach the upper floors of a building, such as a roof garden. The design and application options are virtually unlimited, and the light source is incredible.

Current architectural design installs horizontal structural glazing to create structural glass floors where illumination or vision must travel between two strata of a structure. These long-lasting walk-on glass floor are made with the highest glazing standards to provide a clean and vivid glass surface. Architectural design and the limitless style of the house are slipping into the future with more innovations and sturdiness in structural glass flooring.

Use of glass in floors 

Structural glass flooring may be incorporated into almost any design scheme. Glass floor is usually installed on the flooring above a basement or other space that requires extra light. Skylights and even more modern rooflights may turn any room into a paradise by adding more light.

Frameless glass is excellent in the manner that it blends seamlessly into the most modern of designs. You can propose a den with a rather flat area above it. Include a unique roof paradise, often known as a terrace garden, as a retreat. To take full benefit of the pleasant light-filled ambience, you may as well toss in some personal spa indulgences.

This private deck can be covered with architectural glass, either clear or tinted. If desired, make it a double walk-on glass floor. When it comes to dealing with the wonders of architectural glass, there are no bounds to your imagination.

Because of the transparencies employed in frameless glass, structural glass flooring offers the thrill of having more light.

For a particularly spectacular effect, install the glass floor above a stream or water feature. Many people who use it in an outdoor environment opt to allow a landscape or other natural features to shine through. Bring the concept to life by adding a walk-on floorlight to the glass feature

Internal walk-on glass floors

The glass floor works best when it’s close to another significant light source, allowing you to take full benefit of the natural light. Internal glass panes are typically seen near lines of bi-fold doors, solid floor-to-ceiling windows, or below rooflights.

Internal walk-on glass floors can be single-glazed in rare cases, although double-glazed variants are more frequent. To prevent slips and falls, they must be buried into the building, with the outer frame sitting on sufficient supports around the four borders. Larger versions may require extra support, such as rafters to separate different panels or metal or structural glass fins incorporated into the structure.

External walk on glass floors

You can position frameless glass immediately outdoors in some cases, for example, if you have a basement that stretches outside into the back yard, to maximise the usage of top-down sunshine.

External walk-on floorlight has many of the same qualities as internal walk-on floorlight, but they must fulfill more strict energy efficiency and strength requirements.

Keeping all this in consideration, they’ll always be double-glazed, and enhancements like gas fills and low-E coatings will often be included to restrict the amount of heat that leaks outdoors.

Glass floor thickness and glass features for a walk-on glass

Structural glass flooring that can be walked on is utilized in a variety of indoor and outdoor applications. The uniform and concentrated loads must be examined for the walk-on floor.

There should be a minimum of two glass panels, each with the potential to support the applied loads individually for four-edge backed toughened and laminated glass, though the recommendation is often given to the use of three panes, two of which are crafted to be completely capable of performing the load-bearing operation with the third one acting as a backup unit.

Is the glass floor safe for walking on?

The dimensions, span, projected pedestrian weight, and performance requirements all influence the glass specifications for the glass floor.

Multiple panels of glass can be bonded together to form the upper surface of the glazing. This results in a sturdy structural glass flooring that can withstand the requisite pedestrian load.

The exterior surface of any walk-on floorlight should have anti-slip coatings. many possibilities of anti-slip coating, determining the optimal finish for your project.

The structural glass flooring with 27mm thermal breaks and a glass standard of 33mm unit laminate, makes it safer to walk on and keeps it more thermally effective than most other rooflights available in the market. Walk-on glass may provide each property with additional architectural possibilities and features.

Glass floor price

The cost of a glass floor depends on various factors:

1 – The thickness of the Glass

The thickness of glass used for a glass floor has a significant impact on the price of setup, and when cost determines the dimensions of a project, it’s always a good idea to look into the factors that determine the thickness of the glass prior to actually drawing up the final design.

2 – Load Specifications

The greater the load that the glass floor must withstand, the thicker and more strong the frameless glass must be.

3 – Support

The support provided to support the glass panels to provide structural glass flooring affects the thickness of the chosen glass which eventually varies the cost.

4 – Glass Type

Because glass flooring is so expensive to repair after it’s been placed, the greater robustness provided by the completely hardened glass is outweighed by its increased susceptibility.

In general, regular float glass and heat-strengthened glass are favored in the laminate construction of glass floor.

For installations requiring big panes of glass, heat-strengthened glass is recommended. While employing heat-strengthened glass decreases the thickness of the laminate, it does not necessarily lower the overall glass price. It can, however, reduce the weight of the glass, which can lower installation and transportation expenses.

5 – The span of the Glass

The most important consideration in determining the glass floor is the load and laminate style. The greatest width that the glass can span is measured in thickness and it ultimately affects the pricing of the glass.

6 – Other Factors

Non-rectangular glass, like any other glass system, has a substantial cost impact; for example, a circular glass will cost almost twice as much as a square of the same dimensions.

Glass flooring likewise has a minimum size pricing, and every panel less than 0.5 sq. m will be charged as 0.5 sq. m, regardless of the actual size.

Why Walk-on Floorlight?

Many architects and designers choose the glass floor as an important and elegant design element. There is nearly no glass that does not go with any decor. You will undoubtedly discover the ideal solution for any house, workplace, or another sort of building due to the product’s vast applicability and remarkable diversity of size possibilities.


Leave a Reply

Your email address will not be published. Required fields are marked *